Diestco Manual Wheelchair Cover

The Diestco Manual Wheelchair Cover is designed to protect a folding manual wheelchair during travel or storage from weather and dust. With convenient quick release buckle and Velcro side access, this wheelchair cover can easily slip over the arm on a wheelchair lift. The Diestco Manual Wheelchair Cover is made of water-resistant nylon with a urethane backing and outer DWR coating, with seam protection for the greatest weather protection. The cover has a full back slit which allows the cover to be placed on once the wheelchair is in the hanging arm of the carrier and then to cover the wheelchair. Features a front sewn elastic band which wraps tightly around the wheelchair footrests, and a rear cinch drawstring to secure the cover bottom around the wheels. The bottom of the cover includes four grommet tie down points for highway travel and a handy carrying pouch. For extra security, when transporting a wheelchair on the back of a vehicle, tie down the bottom by hooking bungee-type cords (not included) through the bottom belt loops. The Diestco Manual Wheelchair Cover is made of 400-denier nylon with a urethane backing for durable protection from weather and dust. Please note: The Folding Manual Wheelchair Cover is not intended for highway use without using a securing device such as rope or cords over the top and through the grommet holes. This will reduce the amount of excess room under the cover and prevent billowing at high speeds. Diestco Manual Wheelchair Cover Instructions Manual Wheelchair Cover Specifications: Measures: 38 inches long, 7 inches wide, 44 inches high. Includes: Carrying pouch. Material: 400-denier nylon with a urethane backing. Made in: USA.